Tweet
I bougth a 6X0-48206-12-00 Flush mount control and a 704-82570-08-00 Switch Panel with Stop landyard to mount on my yamaha 115hp v4 1991, I se now that the switsch panel conection only have 8 pin insted of the 10 pin harness. it seams that the light blue and the light green leads for the tilt is missing on the conection with 8 pins . Now i wonder if al of the rest colors are the same on 8 pins and 10 pins , the yello from 8 pin to the yello on the 10 pin and so green to gren , red to red .....and so on ? . I think i gone cut the 10 pin harness conection and cut the switch panel conection and then put the cables togeter. Best regards Frogggy