If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I don't know what to do with the two small pink leads on my 2012 150hp Yamaha. Does any one know what they go to and where do you hook up the trim lead? I have the 2004 gauges.
then 04 package may not work well,may need some simple wiring mods on the engine.
the two pink leads only get plugged together when using command link guages.
make sure the tach dip switches are set for two wire trim,4 stroke and 12 pole alt.
Tweet
Comment