need suggestions

[reelshocker]

I have twin 250 4strokes 2006. Today went to run them, the port motor started up fine, the starboard one though when i turn the key half way ,let it go thru its startup display then crank it the motor starts up but the display goes thru a start up screen again. any suggestions

[rodbolt17]

mostly normal but check all battery connections and battery condition.
it may be dropping enough voltage cranking to power down the guages.

[reelshocker]

ok thanks why would it do it on the starboard motor not the port? I have 2 batteries and both switches are on ALL