Tweet
What is the easiest way to remove the center body 2, part # 38 on the carburetor diagram? And, how much voltage should I have going to the starter assembly on the center carburetor?
-
-
looks like you are speaking about the prime Start system.
Should have 12 volts from motors charging system only while motor is running.
I believe you would need to just pop it out once the diaphragm and cover are removed, but it has been awhile since I removed one.
But I do not see anything to hold it in there other than that.
Just an opinion though -
Thanks for the info. The part did pop out but I guess it had been in there so long that the back side cracked when it came out. Ordered new part. Thanks again for the info!Comment
Comment