Replace 9.9 hp remote with 25 hp tiller

[donjun12]

Currently I have a yamaha 9.9 hp with remote steering and throttle on my boat. I would like to replace it with a 25 hp tiller motor. Can I leave the remote controls and steering cable on my boat and just attach them to the 25 hp motor? If so, can I put the tiller handle from the 25 hp onto the 9.9 hp motor?Thanks for the advice.

[boats.net]

Would need the exact models of both motors to tell if rigging will work on 25 and would have to remove tiller handle and install a remote conversion kit to make it work with remote controls.

[Fins]

I put a 25 Yamaha 2 cycle/single carb, electric/tiller, on my boat and hooked up controls. The shift cable is no problem, as it attaches to the shift lever, as most motors do.

For the throtle, I jury rigged an external lever for cable attachment.

Then there is the problem of the choke. I don't have 10' arms and couldn't reach it.

I found a universal 12 volt solenoid, online for $10 =/- and made a bracket to mount to the carb, and a small linkage link, and it works great. This is second season, with no problems.

[Fins]

Here is a pic of the cable setup, and electric choke.

[Fins]

Guess the pic didn't work! One more try.