Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

Power tilt & trim not working

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Power tilt & trim not working

    I own a 2006 Yamaha 90 HP 4 Stroke, and the power tilt & trim recently stopped working. The switch on the remote control, nor the switch on the lower motor cowling are working. When I push either of the 2 switches, I can hear clicking, but the motor does not trim up or down.

    Any pointers on what might be my problem will be very welcome and greatly appreciated.

  • #2
    tilt

    i have seen this before i would take the tilt motor out and hook it up to a battery and see if its working if its not there is your prob and a new one isnt cheap around 500 aust dollers

    Comment


    • #3
      tilt

      also check the tilt solinoids with a meter they can also be the prob

      Comment


      • #4
        thanks, DAN75-90

        Comment


        • #5
          The electrical 2 schematic shows 3 different relays; part #1, part #3, and part #8. Which one is the power trim relay?

          Comment

          Working...
          X