yamaha T60TLR impeller

[Mcphee boat]

I own a small boat rental company.I am going to change the impeller on a Yamaha 2005- 60HP four stroke high thrust motor.
The shift linkage is a spline fit correct? So to remove the lower unit I just remove the 4 bolts and side it down? There is no shift linkage to undo?
Is there anything else I need to lookout for or special tools required.
Thanks for any help in this matter
David

[robert graham]

David, go to Google:Yamaha Maintenance Tips Andy, for instructions with photos for water pump replacement and several other maintenance/repair procedures. Instructional is for a 150HP, but all the basics are there and should help you a lot. I used this to do my 90HP water pump and it's very helpful! Good Luck!

[rodbolt17]

even better, buy the factory service manual.