1991 3hp dies at idle. Like it runs out of gas like idle circuit has dirt in it. Cleaned carb twice including removing low and high speed jets, blowing everything out. There is a tube in one of the jet cavities, could that be the culprit?
Fuel pump diaphragm looks fine and bowl is always full after it dies so it's getting fuel. Idle mix screw is backed out as far as it can be. Turning in just causes it to die sooner.
Fuel pump diaphragm looks fine and bowl is always full after it dies so it's getting fuel. Idle mix screw is backed out as far as it can be. Turning in just causes it to die sooner.
Comment