I replaced the gear pump assembly and the manual relief valve. the trim rams holds pressure but the tilt ram is not. Someone please help me to understand why this is happening. 1997 S150TXRV
Announcement
Collapse
No announcement yet.
Yamaha Outboard POWER TRIM TILT issues
Collapse
X
-
how did you try to work the air out and bleed it?
Need to work it manually several times up and down and then let it rest for a few minutes before bleeding air out and refill with fluid, keep repeating.
If you run the pump it will just aireate the fluid
Comment
ÂÂÂÂÂÂ
Comment