yamaha 2004 250 hpdi turc installation

[Russbodnar]

I bought a used 2004 hpdi 250 turc
I installed new digital guages new wiring harness
The tach I bought and wiring harness have two plugs one male one female
The male plug plugs into the motor just fine but I don't have a female connection at the motor (harness is ther male connection)
Do I need a new piece for the motor or a different harness?
thank you

[boats.net]

For connecting older gauges on new model motors need to install 57630-94500 adapter harness between tach and harness to engine.

[Russbodnar]

The harness i have back to the engine is 68f-82553-80
I was told this harness should mount up to the engine
The female connector is missing at the engine I have a male connector at the harness The female connection at the harness is connected to the engine
is their suposed to be more than one connection at the engine
The part listed 57630-94500 does not come up on your web site

[boats.net]

I'm sorry I put wrong part number on the link, should be 6Y5-85335-00-00(click on link)
Use the 68F harness leaving one connector not connected and install adapter harness at tach.