Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

Replacing Impeller SX200TXRB

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Replacing Impeller SX200TXRB

    Repalcing the impeller ("water pump") on my 2003 SX200TXRB (manufactured late 2002). Existing impeller shows it ran counter clockwise, is this correct?
    Every single youtube vid I've seen on Yamaha's shows they run clockwise.
    Boat is a single engine, 2003 230 Hydrasports 230 Center.

    Thank you!!!

    Brian (and want to get striper fishing in the Hudson).

  • #2
    Impeller

    I'd put the new one back in the way you found it. If you tap the starter(DO NOT START), you can see which way the motor turns, thus the crankshaft and thus the driveshaft direction to the lower unit..

    The impeller "flaps" will flip back to the correct position if installed backwards...

    Is it possible you have a reverse running engine with a reverse prop(for a twin application) now on a single engine vessel?
    Scott
    1997 Angler 204, Center Console powered by a 2006 Yamaha F150TXR

    Comment


    • #3
      doesnt the "key" dictate which way the impeller rotates ? I just did mine and I couldnt put it on the wrong way
      Monster stripers in the Hudson now !

      Comment


      • #4
        Key just attaches impeller to shaft, direction on shaft and impeller depends on motor turning direction.

        Comment


        • #5
          Pretty sure all motors turn clockwise. The left hand rotation is achieved in the lower unit.
          1999 Grady Sailfish SX225 OX66
          1998 Grady Tigercat S200 lightening strike (totalled)

          Comment

          Working...
          X