Tweet
I have a 2005 200 4 stroke that the multiguage oil and water temp do not work, called Yamaha tech support and was told my moto was a 2005 and the multiguage was a 2004 and there was a tech bulletin out on this. Need a copy for bulletin 2006-006 in PDF format if possible.
-
-
If installing 2004 or older gauge on a 2005 motor then will need to install 6Y5-85335-00-00 Twin connector to single connector adapter harness, install adapter harness between trim/oil harness(tach end of harness) and tachometer.
Make sure dip switches in back of tach are set for 4 stroke eng., 12 pole alternator and 2 wire trim sender.
Tach-speedo settings.jpg
Comment