2005 hpdi 225, unload the boat and on initial take off it comes out of the hole, it will cut out and then continue coming up to speed but will start losing rpm's. I will come off pad check priming ball and pump it up. Try to come up again and it will maybe do 2 or 3000 rpms. If you press the gas more it just starts cutting out. I hae changed the filter on the side of the eng, checked for air leaks, none found. however i cans see air at times in the water/fuel seperator(maybe an inch). I have chased this for a week now. Exact same everytime. Someone suggested Coils? Any ideas? How can I check the coils or should I keep chasing air leaks. Any and all ideas would be helpful.

Comment