Tilt and Trim Switch

[john.kirvan]

Can a Tilt and Trim Switch be installed in a Yamaha 1998 90hp CTLRW in the lower top cowling?? I only have the one at the controls. A separate one at the motor would really be helpful. Thanks

[boats.net]

You can by connecting switch to small green(down wire) and small blue(up wire) at trim relay.

[john.kirvan]

Tilt & Trim Switch

You can by by connecting switch to small green(down wire) and small blue(up wire) at trim relay.

OK, What type of switch woulf I use and being that the lower half of the cowling doesn't have a hole to recieve the switch, do you have any suggestions on where and how to install it?

[boats.net]

Probably have to use a momentary 3 way toggle switch with water proof boot.