Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

200hp yamaha

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 200hp yamaha

    Ive got a 1998 200hp outboard and it stalls out when coming in to dock , it will start again but stalls after a couple of seconds . It runs great from cold start but struggles to start and idle once its warmed up , any ideas ?

  • #2
    clean /rebuild carbs
    linc/sync carbs
    replace plugs
    replace all filters
    repost results

    Comment


    • #3
      200 hp stalling

      Thanks Ive done all of the above .

      Comment


      • #4
        then post that along with any other maint you may have done, that does help

        Comment


        • #5
          200 hp stalling

          I found the bottom carbs were staying open at idle so I reset them andwill see how it runs now

          Comment


          • #6
            Do you have a water separator. If so change it if you do. It sounds like the gas is failing when you are running. You all so could have a loose hose too.
            Make shure that all of gas line are tight. All so do you have a primmer ball the valve in the do go bad so you do need to change them out.

            Comment


            • #7
              so you cleaned/rebuilt carbs
              lincd/syncd
              and then afterwards found bottom carbs werent opening ??? didnt hook up linkage ??

              Comment


              • #8
                200hp yamaha

                I found the bottom carbs butterfly wasnt closing in the idle position . Im cleaning the carbs and found the float levels werent even so gonna reset them and see what it does .

                Comment

                Working...
                X