PTT issue

[Oliverct]

Hey guys, I'm Oliver from Washington state. I'm new to this forum but have been a long time member on other online forums like GH (greenhulk) its a online PWC forum. Anyways i own a small 18ft center console fishing boat with a Yami 115 on it. Well, we went away for a week on vacation and came back to find out that the trim no longer works! it wont move up or down. You can still here the "click" but no motor sound at all. Ive done some research and think i may need to replace the hydraulic motor, but th engine isnt all the way up so i can get a screw driver in there! Wondering what your guy's thoughts are on this problem of mine.

Thanks, Oliver

[99yam40]

Use a volt meter and DC amp meter to see if the motor is getting voltage to it and if it is check the amps it is pulling. If no voltage the it could be the relay, if not pulling any amps the internal fuse could be blown or brushes not making contact, or winding is bad