703 remote

[Ponderosa]

I am changing out a 703 remote and it is not like my old one.
I will be wiring this to a 1987 Yamaha 40HP 10 Pin
I have two drop cords with plugs whereby previously I only had one.
(1) 2 blue w/strip connected together
(2) 2 Red wires connected together
(3) 2 Green wires with strip connected together

In addition I have a drop connector with the following.

Single red wire
Single black wiresingle yellow wire
single green wire

My main meters are:
Volt Meter

Fuel Guage

RPM
all made by yamaha

what wires do I connect to what.
I have not been able to locate information telling me what to connect so that meters will work.

I have another set of switches that i will post on a seperate post.
thanks

[boats.net]

The gauges connect to the yellow, green, black and red wire on control box, if gauges are Yamaha then match wire colors.
The Red, blue and green wires are for remote trim switch in boat, unless you have a trim switch bow of boat then don't connect these wires to anything.