you need test test amp draw
if its too high, 5+ amps, it will shut down the system,via ground
try using a seperate 12v supply and ground to run hp pump
if ethanol issues like ive had this summer, you should clean pres reg filter, behind VST
and
injector screens- pull rail, work out screens on front of each with a razor blade edge/knife edge and clean with a good cleaner
if its too high, 5+ amps, it will shut down the system,via ground
try using a seperate 12v supply and ground to run hp pump
if ethanol issues like ive had this summer, you should clean pres reg filter, behind VST
and
injector screens- pull rail, work out screens on front of each with a razor blade edge/knife edge and clean with a good cleaner
Comment