2004 F150 4 Stroke Stalling

[FTGS]

I know there have been some posts on this before however, are there any new fixes to this problem.?? Or an old fix that I missed?

Engine has the vapor lock mod, Brand new VST, sync and link, fuel filter, vaccum check, all set. It is a low rpm stall when shifting such as when you are docking ect.

Anyone got an answer to this ?? Thank you so much. !!!!!!!!!!!!

Very grateful if anyone would share.

[rodbolt17]

easy fix.
do you have access to a laptop with version 1.33?

[FTGS]

Thanks rodbolt, personally no but I'm sure my tech can get his hands on one. What shall I have him do? Would love to fix this issue. Very much appreciate your knowledge and input.

[rodbolt17]

then make sure the shutter pairs are synchronized,then we are going to open the shutters with the adjustment screw then we are going to reset the TPS to .70-.72V.
when its all said and done your looking at an ISC command in the 40-47% range with a TPS voltage of .7-.72V and an engine idle speed of about 700 RPM.