Command Link Information

[hbrutschy2]

I re powered my 50' houseboat, I went from in board OMC to an outboard Yamaha. My motor is an F 115 TLR serial# 1093060. My local Yamaha dealer is not much help. I am trying to find information on gauges and controls, I will need everything from the motor to the helm, I have already installed hydraulic steering and a non Yamaha control box from Teleflex, I am told I need part number 6y8-we83s-10-00 (2 gauge kit) plus various harnesses, I need to know what all is included in this kit and what else I need in conjunction with it, I will also need a key switch and information on wiring the trim and tilt on my control box to the Yamaha harnesses, Any information you can offer would be greatly appreciated.
My E-mail is its4tbelow@hotmail.com

[boats.net]

The kit inculdes evrything except a main bus wire that goes between hub mounted at transom and hub that mounts at console. Also need one pigtail bus wire per gauge that connects to hub at console and to each gauge.
Choose one Main Bus wire:
6Y8-82553-01-00 1 Ft
6Y8-82553-50-00 10 Ft
6Y8-82553-11-00 15 Ft
6Y8-82553-21-00 20 Ft
6Y8-82553-31-00 25Ft
6Y8-82553-41-00 30 Ft
Choose two Pigtail Bus wires:
6Y8-82521-01-00 1 Ft
6Y8-82521-11-00 2 Ft
6Y8-82521-21-00 3 Ft
6Y8-82521-31-00 6 Ft
6Y8-82521-41-00 9 Ft
6Y8-82521-51-00 12 Ft
Key switch and harness is:
704-82570-08-00 Key Switch panel
688-8258A-50-00 16 Ft Main harness
688-8258A-60-00 20 Ft Main Harness
688-8258A-70-00 23 Ft Main Harness
6K1-8258A-40-00 26 Ft Main Harness
61B-8258A-01-00 31 Ft Main Harness
Connect trim switch to red(12V), green(trim down) and blue(trim up) wires in main harness
Connect brown wires in main harness to neutral safety switch in control box.