F115 old to new wiring

[tdb239]

I have a F115 2004 them replacing with a 2010 model all the wiring seems to be plugging in fine I have the two multi gauge is speed/TAC the new engine does not have a plug for the pink/black/orange/gray plug that I had attached to the 2004

I guess my question is is there an adapter harness for this it's so you happen to have the part number

thanks

Tony's dockside service and brokerage

found the answer we were able to disconnect trim sender at plug that goes to harness on engine and wire sending unit directly into old gauge harness we only needed the pink/black wires for the trim indicator.

Thanks Tony's dockside service and brokerage

[boats.net]

There is an adapter if still need it, part number 6Y5-85335-00-00, install at tachometer.