Remote control box

[ronnekia]

Hello,
Can anyone out there tell me what control box and cable (s) I would need to set up a Yamaha electric start tiller to remote ? I bought the pieces from boats.net but need a contol box.
The model that I have is a T9.9 EL HS. Thanks to anyone who responds. Keep in mind that my mechanical ability is kinda of low. I need to put this on a pontoon boat that is on a restricted HP lake.
Thanks again to anyone who can help,
Ron

[jb123]

im not positive about the smaller motors, do you have throttle and gear cables? if so you can use a 703, side mount or a 704, top mount control.

[ronnekia]

Thanks jb123 for replying.
I have no cables at this point. Some of the controls listed come with cables. Some have a 7 prong or 10 prong in different lengths. I would need a side mount ( "703" as you said ). The motor is an electric start but no trim tabs ( being just a small 9.9 ).
I just didn't know since it is a " tiller " model if it could be set up as a remote start and shift.
Thanks again for your time!
Ron