90hp tlry trim and tilt, how does this piston end remove

[200090tlry]

I have pics. I used 30torx to remove the bottom part not shown. I hope rod shows up to help me out redoing all the seals. Just opened up cool one hoping this will go smoother. Looks like it will spin off? Righty tighty left losey or reverse threaded. Wait there is a pin with ball bearing behind, how do I remove the pin my fishing hemostate not working(pbblasted area)

[rodbolt17]

under those 5 springs are 5 pins and 5 loose balls.
remove them.
use two steel pins or bolts in the holes and a large screwdriver to twist it off.
there is a tool that can clamp the piston.

[rodbolt17]

that pinned bearing STAYS do not remove it its the fluid metering valve for shock impact.

[200090tlry]

Is this regular threads righty tighty

Want to be sure before I start cranking on it

[200090tlry]

Got it right tighty lefty loosy

Used pvc pipe on each end, one with 3/4 breaker bar other bolts plus wrench over one. Blam it came loose, dont ask me how I ever got the cap off in first place. Armstrong spanner wrench got it with cheater pipe. Now I need to tackle two lifts in front one is leaking small amount tried my spanner and no go humm, give it a hit of hot hair blower see if she will budge.