Rigging an 2004 F90TLRC

[Damntarpon]

Hello,
I'm new here, and I will be mounting this engine on a bare boat. I have no ther parts except the engine in the box.

The throttle control will need to be mounted on top of the console. I want to have tach, fuel, temp, oil pressure guages. Speedo isn't needed - I use gps for that.

I have my measurements, all I need to know is what parts will match up with the engine correctly.

Thank you very much!

[boats.net]

You would need
704-48205-P1-00 704 Binnacle Control Box
704-82570-08-00 Switch panel
Your choice of main harness
6X3-8258A-00-00 16ft 10 pin main harness
6X3-8258A-10-00 20ft 10 pin main harness
6K1-8258A-40-00 26ft 10 pin main harness
61B-8258A-01-00 31ft 10 pin main harness
Would need two MAR-CABLE-xx-SC(replace xx with length cables needed) throttle and shift cable.
There is lot of choices on gauges,
You can use the 6YR-W0035-E1-00 Multifunction tachometer kit which will display rpm's, trim gauge, hour meter, oil level and overheat warning light, kit includes wire harness.
Or you can look at these analog gauges and select a style and color and I can give you a list needed parts, Yamaha 90hp Accessories, Yamaha 90hp Gauges
You would also need a prop.

[Damntarpon]

Outstanding help! Thank you very much!

[Damntarpon]

Awesome help!
Made my list and checking it twice!
One more question: Can these same units be used on the F115 as well? Might have to rig one of those, too.

[boats.net]

Yes will work on F115 except for the Tach Kit.
Use tach kit number:
6YR-W0035-E1-00 1994-2004 motors
6YR-W0035-E2-00 2005 and newer motors