Command Link Speedo

[swallin]

Gday all,
I have a 2007 F60 which at the moment I have set up with the round commandlink multi function tach.
Obviously to enable that I have the ECU plugged and cabled running to a BUS slot on the hub (6Y8-81920-01)
Then the small cable from DEVICE slot to the multifunction TACH.

I would like to now add to the system by adding the round commandlink speed fuel management gauge.
In order to get fuel flow data to the gauge will I need anything other than the gauge and short wire linking to a spare DEVICE slot on the hub?

Many regards,
Steve

[boats.net]

You would need

6Y8-83500-11-00 CL Round Speed/Fuel Gauge
6Y8-82521-11-00 2Ft Pigtail Bus Wire(other lengths available)
6Y8-8356N-01-00 GPS/Fuel Harness
If not connecting Speedo to GPS for speed signal then would also need 60V-8A4L1-11-00 Speed Sensor mounted on engine.

[swallin]

thanks for your reply!
much appreciated.

Steve