2001 HPDI is cutting out. If you prime bulb, bulb will get firm and engine will start and run for 4-6 minutes then cut out. Re-prime, engine starts and runs for another 4-6 minutes. Engine will run fine and continueously above 1200 rpm all the way to 5000rpm. Above 5000rpm engine will sputter and die (re-prime she will start right up). Looked in fuel tank, fuel appears to be okay-no gunk, sediment or trash. Have not checked pick-up. Have replaced in line filter several times and just replaced bulb. Also, blew out overflow vent/line.
Any ideas or thoughts would be appreciated. Happy Thanksgiving!
Any ideas or thoughts would be appreciated. Happy Thanksgiving!
Comment