I have a 2000 model 130hp saltwater series on 17foot half cab. Starts easy when cold with choke but then can sometimes need choke and some revs to start once warm. not sure why. Will run all day a 3/4 throttle without any issues but hold it at WOT about 45kt for about a couple of minutes and alarm sounds and it goes into limp mode. Turn engine off for about a minute and then it runs fine again. Any suggestions on why it would do this? Temp seems good telltale has good pressure and both oil tanks seem to be right.
Announcement
Collapse
No announcement yet.
130hp limp mode
Collapse
X
Comment