Power trim indicator

[GEO]

2006 90tlr 2 stroke, 703 10 pin control with harness for tilt trim indicator. Green wire trim down, lt blue trim up, red power. Can I use an old trim indicator pre 2001 with three poles. S for sender G for ground and I for ignition. Can I connect both sender wires from control blue up and green down to the one pole s on the indicator and will that work?

[boats.net]

No the green and blue wires are trim relay wires not trim sender. Would need trim harness 6Y5-83653-20-00 install to engine and connect to trim gauge(the pink wire in harness is trim sender wire).

[GEO]

Thank You, For the info.