If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Just purchased a 90 hp 2 stroke. It has never been started but the manufacture date is 11/06. So its been sitting around for awhile. Should I do anything special before I start it? Like change the impeller or lower unit oil or anything else.
The gearcase oil needs to be checked and filled, engine oil system needs to be bleed and use 50:1 oil mix in gas and follow breakin steps as listed in owners manual.
Tweet
New old motor
Comment