Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

adjusting floats

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • adjusting floats

    ok to start off i know im an idiot.i have 2005 or 2005 yamaha outbourd 2 stroke 60ltr. thye carbs were clogged from water and not being used i pulled the carbs off took them apart and soaked them but not thinkingb took the vloats off not looking at them so i put verything together and the motor runs but is leaking gas threw thge top vent so i need too know if anyonbe can tell me how to adjust the floats too the right position thank you all very much.
    ken.

  • #2
    The floats should be about level with carb inverted, sounds like you have float vlave not seating.
    Regards
    Boats.net
    Yamaha Outboard Parts

    Comment

    Working...
    X