I have installed a new digital tach in my boat. I have a 200 SX225TX, 2 stroke engine. I bought everything new from the Yamaha Dealer.
Installed the harness (s).
Dip switches are all off according to card with guage.
No other instructions with harness or guage.
Guage constantly flashes at temp symbol.
Oil symbols have a bar under each symbol.
Have disconnected the grey wire at the engine.
This engine has not been modified, these are factory harness plugged into a factory guage and factory complete engine.
Why do I have to jump through hoops to get this to work correctly and why can't Yamaha provide instructions and diagrams for this type of installation.
The dealer I bought if from wants to charge me $100 an hour to make it work.
Installed the harness (s).
Dip switches are all off according to card with guage.
No other instructions with harness or guage.
Guage constantly flashes at temp symbol.
Oil symbols have a bar under each symbol.
Have disconnected the grey wire at the engine.
This engine has not been modified, these are factory harness plugged into a factory guage and factory complete engine.
Why do I have to jump through hoops to get this to work correctly and why can't Yamaha provide instructions and diagrams for this type of installation.
The dealer I bought if from wants to charge me $100 an hour to make it work.
Comment