Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

Replacement of guages

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Replacement of guages

    I acquired a 1987 22 ft. AquaSport with a 200 hp Yamaha (1990). The LCD Meter assembly & the LCD Tach-Trim-Oil assembly gauge are nearly impossible to read and extremely weathered. Can these gauges still be found or are there generic gauges that can be used to replace the old ones? I have tried searching on the internet but haven't had any success.
    Thanks for any help you can furnish.
    gcg

  • #2
    lcd gauges

    Please share what you find. I have an 1999 yama SWS oxy 66 with both gauges not working...lcd is out, fades etc. I would like replace with analog. Haven't been to service center yet to see if this can be done. I thought it maybe a short of somekind also. gale

    Comment


    • #3
      The Yamaha digital gauges for motors older than 1994 are no longer available, you can use Yamaha(without warning lights) or aftermarket analog gauges on it.
      Regards
      Boats.net
      Yamaha Outboard Parts

      Comment

      Working...
      X