Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

115 2 stroke wont start after carb job

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 115 2 stroke wont start after carb job

    After doing a basic carb clean I am having trouble getting my 2002 115 hp 2 stroke started. It was running rough before I took the carbs off to clean and now it wont start at all!?!?!?!? I drained the entire fuel system thinking the fuel might be a little old and afterward I am getting fuel to the carbs but it still wont start. Any suggestions would be helpful. Thanks

  • #2
    Did you check to see if carbs have fuel in them?
    Regards
    Boats.net
    Yamaha Outboard Parts

    Comment


    • #3
      Are you getting spark?

      Comment


      • #4
        carbs do have fuel and I am getting spark.?.? I am about to take to shop!?!?!?

        Comment


        • #5
          you need compression, spark, and fuel/ air to run. so you must be missing something or they are in the wrong proportion.

          Comment


          • #6
            Make sure the choke is hooked up properly. It's easy to mess up and hidden behind the intake baffle. Visually verify that the auto choke is working.
            17MA

            Comment

            Working...
            X