If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I accidentally poured 4 cycle oil instead of 2 in my reservoir over about 2 inches of 2 cycle oil. Ran boat for about 30 minutes before realized error. Drained oil and replaced with 2 cycle and added stabil. Will I incur any damage?
May be a good idea to use a portable tank with oil/gas mix and run motor untill you are sure the oil pump is pumping good 2 stroke oil into the motor. Do a compression test to see if there is any indication of a problem
Tweet
Accidently Used 4 cycle instead of 2 cycle oil
Comment