Tweet
Was out in my permit flats boat this weekend as the motor was running fine. Went to start up the motor and it was making a buzzing sound from the solenoid and would'nt start. Trim and tilt was working then stopped working also. So I bypassed the solenoid by unataching the brown wire and touched the battery side of solenoid and ran fine to the loading ramp. Next day reatached brown wire to original wire and still was buzzing from the solenoid. Checked battery on load and was fine. Replaced battery to starter wires and battery switch with brand new. Checked fuse coming from red wire in motor harness and was good. Stumped on this wiring problem. Can someone helppppppp PLEASE?
Comment