Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

200vmax fuel pressure problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 200vmax fuel pressure problem

    I am having fuel pressure problems with 200vmax.I have to pump the bulb before every start. I have replaced the bulb and three low pressure pumps.Any sugestions?

  • #2
    Is this a carb model or fuel injected model engine? Does it run good after it starts?
    Regards
    Boats.net
    Yamaha Outboard Parts

    Comment


    • #3
      VMAX reply

      I belive it is a EFI. It has three carbs. It starts and runs has some hesitation and will stall on hole shot if the bulb has not been primed.
      Thanks for your help
      Bo

      Comment


      • #4
        If it has carbs it is not a efi.
        Have you replaced your fuel filters and cleaned the carbs

        Comment


        • #5
          I have replaced the filters but have not cleaned the carbs.I will try that.
          Thanks
          Bo

          Comment

          Working...
          X