I have a 03 F60 that developed a miss on #3 cylinder. I have change the plugs, drained and filled tank with fresh fuel w/ stabilizer also changed fuel filter/separator . Pulled carbs cleaned #3 carb with carb cleaner and compressed air. Still have miss. Ran and pulled each plug wire all had good spark, all dropped rpm except #3 swapped coils and miss didn't change. Does anyone have any suggestions? Missing out on some good fishing.
Announcement
Collapse
No announcement yet.
F60TLRB #3 Miss
Collapse
X
-
Originally posted by boat4fun View PostI have a 03 F60 that developed a miss on #3 cylinder. I have change the plugs, drained and filled tank with fresh fuel w/ stabilizer also changed fuel filter/separator . Pulled carbs cleaned #3 carb with carb cleaner and compressed air. Still have miss. Ran and pulled each plug wire all had good spark, all dropped rpm except #3 swapped coils and miss didn't change. Does anyone have any suggestions? Missing out on some good fishing.Chris
2004 GW 330 Express w/ Twin F225's
Comment
 -
I disassembled and soaked the carb and jets. also cleaned jets with wire and visually looked through jets. And also when I run the motor and pull the wires one by one #4 and #1 kill the engine but #2 and #3 don't.
Comment
 -
The carb linkage needs to be synchronized each time they are removed on four stroke multi carb engines, they may need to be sync.
Comment
ÂÂÂÂÂÂ
Comment